Fiber cement board installation

Fiber cement board installation

First of all, according to drawings with the actual size of the pay-off, with the boom of the main keel level fixed on the floor, spacing between main keel is about 1m, cladding keel must be mounted on the same horizontal plane. Fiber cement pressure plate must be perpendicular to the direction of Vice keel laying at the plate in the longitudinal direction, and the joint sheet width direction staggered away from the plate edge screw is 15mm, 50mm angle from the board position, screw spacing of 180 about ~ 200mm, according to the keel before sealing plate first ruled on the plate elastic line, the position in the nail head through the first pre-drill a shallow pit, installed after the screw to ensure that board formation, the screw head sinking inner panel, below the plate surface is not more than 0.5mm, fixed plate starting from the middle, and then fixed perimeter. The gap between the board and the board is not less than 5mm, a large area with a long aisle top surface 10 ~ 15m intervals remain an expansion joint.

TOP RANKS
Similar Articles Top
News Articles
Your Browsing History
Home|Products| Case|News|Contact Us|About Us

营销型网站建设

2015-2020 China Kunming City Hing Building Material Co., Ltd [Yunnan ICP No. 15006559] easy network extension Technical Support
Sales Tel: 0871-67881188; 0871-67882288 Fax: 0871-67883666 E-mail: 2025562536@qq.com
Website: www.jiudejiancai.com Address: Kunming Jinning County Jincheng Industrial Park
Main products: fiber cement board, calcium silicate board, explosion relief panels, wood panels, ceiling panels, composite panels